Tuesday, February 9, 2021

FileSender UI overhaul to using Bootstrap

›
 I have recently made a branch available which updates the user interface for FileSender to use Bootstrap. In this post I will discuss some...
Sunday, January 3, 2021

New home for the Astrolabe, pocket day calc, and coin of sentimental value

›
 I turned a slice of a tree trunk into a matching pair of holders for sentimental objects over the break. This has a few coats of polyuretha...
Friday, August 7, 2020

Small 1/4 inch socket set into a nicer walnut tray

›
 I was recently thinking about how I could make a selection of 1/4 inch drive bits easier to use. It seems I am not alone in the crowd of pe...
Sunday, March 8, 2020

Terry2020 finally making the indoor beast more stable

›
Over time the old Terry robot had evolved from a basic "T" shape to have pan and tilt and a robot arm on board. The rear caster(s)...
Thursday, February 13, 2020

Bidirectional rc joystick

›
With a bit of tinkering one can use the https://github.com/bmellink/IBusBM library to send information back to the remote controller. The in...
Sunday, June 23, 2019

X-Axis is now ready!

›
The thread plate is now mounted to the base with thread lock in select locations. The top can still come off easily so I can drill holes to ...
1 comment:
Monday, June 17, 2019

The X Axis is growing...

›
The new cnc X axis will be around a meter in length. This presents some issues with material selection as steel that is 1100mm long by 350mm...